60 days
Guarantee
Get
Join usThe 2024 FLY II represents an evolutionary leap from the original model that features new materials, even more advanced 3D flying shapes, and a host of modifications aimed at improving performance and enhancing the user experience.
Continuing with the unique high lift coefficient concept, it features an even stiffer airframe and a new twist profile, greatly facilitating handling and control in high wind conditions. The canopy tension distribution, originally derived from windsurfing sail design, has been fine-tuned to improve upwind speed and handling through upwind maneuvers. The dihedral front profile has been reshaped for increased stability when sheeted in, particularly beneficial for harness-equipped riders. Additional Leading Edge (LE) segments at the wingtips not only reduce drag but also provide added stiffness, enabling the wing to point higher. The vented strut has been updated with an additional stiffener at the Leading Edge (LE) in the center, enhancing stability in the area ahead of the fill panel, making the wing much more forgiving during tacks.
The FLY II is now constructed entirely from Teijin LE dacron, greatly enhancing its shape durability. The trailing edge panels forward of the frame are made from Challenge Code 95 for exceptional stiffness and long lasting shape control. The back windows now feature a dyneema X-ply for the optimum balance between visibility, light weight and structural integrity, while the front windows are clear PVC. The windows have been redesigned and repositioned to improve visibility.
The wide range of size options between 4.0 and 6.0 are unique to the Fly II. NeilPryde have simplified the sizing between 1.8 to 3.5 compared to the previous model to make the selection process much easier.
Product highlights
High lift
Wing generates a lot of power so you can go to the water with smaller size than other models
Unique handles
Unique handles provide an ergonomic hand position that reduces fatigue and makes control and manoeuvring easier
Solid frame
High-quality bladders, double-chamber construction and modern materials guarantee rigidity, durability and safety
Stability
The shape and technical solutions of the Fly II guarantee incredible stability, even in a gusty wind
Durability
Wing canopy is resistant to stretching and tearing thanks to an optimised panel layout and rip-stop materials
Wide range of sizes
As many as 12 variants from 1.8 to 6.7 m2 guarantee the right size for every condition and every rider
Features
High tension profile with structured camber lens
The 3D shape of the canopy leading edge is defined by a series of transverse panels that converge at the wingtips. This leverages the LE Tube structure to maximize tension in the critical entry sections – the result is more lift and a higher stall angle for better acceleration in light winds, and the ability to fly efficiently at low angles of attack for better control and higher top speeds in strong winds.
Vented strut
The large opening between the LE and the front of the fill panel (which connects the canopy to the strut) allows the pressure to equalize across the two sides of the wing. This improves overall performance and makes the wing even more stable.
High lift concept
Due to the highly refined LE geometry and entry shaping, each wing produces the maximum thrust (power and acceleration) for its size. This dramatically increases the range, allowing riders to use a smaller wing than is typical in each set of conditions. The result is easier handling and greater maneuverability.
Shape differences - Fly II vs Fly II Pro
The Fly II and Fly II PRO are very close. The major shape differences are the LE diameter (PRO is much smaller) and that - because it has a flatter entry angle to leverage the leading edge (LE) stiffness of the Aluula and reduce drag - the Fly PRO canopy appears slightly smaller when shown as flat pieces.
Transverse canopy paneling
The new wings have much more precise shaping built in, while retaining the transverse paneling that holds it‘s shape under load and stretches much less over time. There are now 4 stitched transverse panels on each side of the wing compared to only 2 in the previous model, vastly increasing shape stability.
Integral batten system
Sewn-in composite battens create a flat, fast trailing edge with minimum flutter.
Unique handle design
Calibrated positions for effortless balanced flight, ergonomic design to reduce fatigue and position the wing at the optimum flight angle.
Separated air chambers
The partition adds safety, increases the Leading Edge stiffness and allows the wing to be deflated more quickly.
High quality bladder with anti-twist system
Fixing the bladder in different spots in the tube prevents it from twisting and therefore protects it from breaking when inflating. It also makes changing the bladder super easy and long-lasting shape control. Bladder made in Germany.
Canopy material
The trailing edge panels forward of the frame are made from Challenge Code 95 for exceptional stiffness and long-lasting shape control. Transverse paneling holds shape under load and reduces stretch over time.
For instant answer - open the chat and ask your question. We're active 9.00-17.00 CET.
Is it afterhours? No problem - leave us a message and we’ll respond early the next day.
+48 513 020 570
For those who prefer phone calls - that's our number. You can give us a ring between 9.00-17.00 CET.
Facebook
Instagram
YouTube
