Who is the Loftsails Raceboardblade Carbon V8 9.5 for?
Loftsails Raceboardblade Carbon V8 9.5 is a racing windsurf sail for Raceboard competition in light to medium winds. It is designed for sailors who need early power, efficient pumping and a stable profile as the wind increases.
Early power generation
The deeper profile and fuller upper section create drive sooner in marginal conditions. This helps accelerate the board, bring it onto the rail earlier and maintain speed through weaker or inconsistent gusts.
Easier pumping and reduced swing weight
The high aspect ratio, longer mast and shorter boom reduce swing weight. This makes the sail easier to pump and quicker to handle during course changes and transitions between tacks.
Stable profile on both tacks
Four TekCam 3 cambers and the carbon batten system help maintain profile stability as the wind increases. Side-alternating batten pockets reduce construction asymmetry, giving the sail a more consistent feel on both tacks.
Carbon V8 construction
In the Carbon V8 version, the standard quad-axial body panels are replaced with lightweight 2 mil X-Ply. Carbon threads positioned along the warp lines limit stretch in that direction, helping the sail maintain its designed shape under load.
This construction improves profile stability through the upper end of the wind range and reduces trim changes during racing without adding unnecessary weight.
Adjustment during racing
The exposed tack eyelet allows the use of an adjustable downhaul system. This lets you change downhaul tension while sailing and adapt the sail’s response to current conditions on the racecourse.
Features
Blade Mast Pocket
Downhaul tension is distributed evenly between the mast panel and mast pocket, creating a firm leading edge and supporting smooth, consistent cam rotation
Dacron/SU250PE Mast Sleeve
Lightweight Dacron in the upper mast sleeve reduces weight at the top of the rig, while durable SU250PE reinforces the lower section where downhaul loads and wear are highest
High-Visibility Panels
4 mil X-Ply in the main window and clear panels positioned along the mast pocket provide a clear forward view during starts and while racing around the course
Carbon Batten System
Lightweight carbon tubes stabilise the profile in stronger wind. The combination of longer rod sections and rear-shifted carbon tube segments creates a shallower entry, reduces drag and supports faster cam rotation
TekCam 3
Four TekCam 3 cambers are 35% lighter than the previous generation. They improve rotation, support higher batten angles and stabilise the upper profile without adding unnecessary weight
Reinforced Panels
Bi-axial X-Ply reinforcements protect the foot, head and clew from the loads created by racing trim. They also protect the area around the longest batten during rolling, transport and storage
Side-Alternating X-Ply Batten Pockets
Batten pockets alternate from one side of the sail to the other, reducing asymmetry caused by seams and helping maintain a balanced profile on both tacks
Exposed Tack
The exposed tack eyelet allows the use of an adjustable downhaul system for precise tuning while racing
Track Strap with Eyelet
Track strap tension remains independent from the downhaul, allowing precise control of the tack area without changing the sail’s main trim
V8 Carbon
A dedicated Carbon V8 9.5 design replaces quad-axial body panels with 2 mil X-Ply. Carbon threads positioned along the warp lines prevent stretch in that direction
Metallic Cam Interface
Reinforced contact surfaces reduce wear around the cambers and help maintain smooth cam function over extended use
For instant answer - open the chat and ask your question. We're active 9.00-17.00 CET.
Is it afterhours? No problem - leave us a message and we’ll respond early the next day.
+48 61 641 70 22
For those who prefer phone calls - that's our number. You can give us a ring between 9.00-17.00 CET.
Facebook
Instagram
YouTube
