30 days
Guarantee
Get
Join usDuotone wing set: Aero Carve 2.0 D/LAB + Aero P stabilizer
Aero Carve 2.0 D/LAB is the Duotone most advanced front wing to date! In search of reducing the drag and weight of the foils to a minimum, producer decided to merge the front wing and front half of the fuselage together. This eliminates any compromise in terms of shaping the front wing to fit fuselage front wing mount. It also allows to remove the three bolts which are necessary to fix "bolt on" SLS front wings on the fuselages, reducing the drag and weight even more. Carve 2.0 D/LAB, same as the SLS variant, are quite different to the previous Carve range. They feel a lot less draggy and way looser in terms of roll, allowing the rider to do heel side to toe side turns way more naturally. The top end speed has also been increased thanks to a thinner profile towards the wing tips and the higher aspect ratio allows the Carve 2.0 D/LAB to glide and pump much better than its predecessor. Compare to the SLS range, the aspect ratio is slightly lower and the profile a bit thinner and faster, to allow these wings to be pushed to higher speeds, whether it is going down fast waves, throwing the most technical freestyle tricks or even using them for wingfoil or kite foil racing.
Aero P stabiliser specially designed to complement Carve 2.0 and Glide ranges. The P series stands for performance!
YOUR PERFORMANCE BENEFITS
Fast and minimal drag - optimized for each individual size
Lowest weight for high performance riding and jumps
Immediate response for intuitive surfing and maximum pop for Freestyle
Improved pump & glide over previous Carve range
Gradually increased control on small sizes and playfulness on larger sizes
The D/LAB range also introduces two smaller sizes, the 650 and 500, but doesn’t include the bigger 1430 found in the SLS range. Two carbon tail options in 37 cm and 43 cm – respectively matching the lengths of 60 cm and 66 cm AL 3BS fuselages – complete the D/LAB glider for either a loose and playful character, or higher control at top speeds.
If you want the ultimate performance, the Carve 2.0 D/LAB is the choice for any advanced to top level riders! Fuselage Aero Tail is not included - please order separately!
SPECIFIC SIZE INFORMATION
500
The smallest and most radical front wings. Aero Carve 2.0 D/LAB 500 is targeted to kids/light riders or experienced ones wanting to tackle big fast waves on their wings or kitefoil at Mach 2 speeds. Tweaked to maintain a good level of control when going full speed when paired with the 43 cm tail, or to be super turny when used with the 37 cm tail. Ideally paired with the 165 P stabilizer and +0.3 deg shim.
650
The second smallest wing in Duotones range, targeted to kids/lighter riders or experienced ones looking for extra speed, whether it is to tackle bigger waves, freestyle on the wing or challenge your friends on a kitefoil race. Rig it with 37 tail for maximum manoeuvrability in the waves or pick the 43 tail for more control at high speed. Ideally paired with the 165 P stabilizer and +0.3 deg shim.
850
It’s got instant turning and response in the waves, exciting speeds for both winging and kite foiling, incredible pop for Freestyle and the glide and low drag efficiency to make it through flat sections. This is the one wing to have in your quiver!
1100
The biggest wing in D/LAB family. Advanced riders will choose this wing for waveriding in small to medium waves and freestylers will love it in light to medium wind conditions. Best suited to heavy kitefoilers or very light conditions, the 1100 D/LAB is a great allrounder that feels slippery for it size and easy to use. It can also be used for prone surfing, where its turning ability is only matched by the smaller Carve 2.0’s, although realistically it will not pump as well as other higher aspect front wings.
Product highlights
D/LAB CONSTRUCTION
The purpose of D/LAB is to make the best Wing Foiling gear using the best materials and construction methods on this planet, no holds barred
FAST AND EASY
Fast and minimal drag - optimized for each individual size
IMPROVEMENT
Improved pump & glide over previous Carve range
HANDLING
Immediate response for intuitive surfing and maximum pop for freestyle
LIGHTWEIGHT
Lowest weight for high performance riding and jumps
SIZE SPECIFIC
Gradually increased control on small sizes and playfulness on larger sizes
Compatibility
All D/LAB series front wings are compatible only with D/LAB fuselages. SLS front wings are compatible with Aero AL and Aero AL 3BS fuselages.
All stabilzers from C, S, H i P series can be used with all fuselages, interchangeably, but it is worth remembering that the front and rear wings have certain ranges of application and will work best with sets consisting of elements with similar range of use.
Set components
- Front wing: Carve 2.0 D/LAB
- Back wing: Aero Stabilizer P
For instant answer - open the chat and ask your question. We're active 9.00-17.00 CET.
Is it afterhours? No problem - leave us a message and we’ll respond early the next day.
+48 513 020 570
For those who prefer phone calls - that's our number. You can give us a ring between 9.00-17.00 CET.
Facebook
Instagram
YouTube
