Performance Lightwind
Slicer 2027 is an advanced lightwind board for riders looking for maximum efficiency when the wind is marginal.
Its construction combines a large usable surface area, low weight and the stiffness of a full carbon layup to make the most of light conditions and generate the speed needed for early planing.
Full Carbon Construction
The Slicer uses a Full Carbon Construction, keeping the board extremely light despite its large dimensions.
Carbon fiber provides high stiffness and quickly returns to its original shape after being loaded. This gives the board a dynamic response and supports direct energy transfer from the rider.
Step Cap Deck and rocker stability
The Step Cap Deck works together with the carbon layup to help the board maintain its designed rocker under load.
This is especially important in ultra-light wind, where maintaining the intended board geometry supports acceleration and efficient planing.
Fin mounting for 2027
For 2027, CrazyFly introduced new 6 mm-diameter fin mounting holes. When replacing fins or using accessories from previous model years, check that the mounting system is compatible.
Lightwind outline and flat rocker
The wide outline with rounded tips maximizes the usable surface area of the board.
Combined with the flat rocker and inverted outline, it helps reduce speed loss and allows the board to make efficient use of limited kite power.
Precise upwind edging
Hand-finished rails and the stiff carbon construction support strong and precise edging.
The Slicer is designed with excellent upwind performance in mind, which is particularly important in lightwind conditions.
Medium flex and comfort in chop
Despite the full carbon construction, the Slicer retains a finely tuned medium flex.
This setup is aimed at intermediate and advanced riders, combining a dynamic feel with comfort when riding through choppy water.
Asymmetrical fin positioning
The fins on the Slicer are positioned asymmetrically.
They are placed on the heel-side edge of the tips and in the center of the tips. This layout helps keep the fins engaged in the water more consistently, supporting grip and improving upwind ability.
Fusion Side Walls
The Fusion Side Walls are made from a special blend of high-end polymers.
According to CrazyFly, these are their strongest sidewalls to date, designed for high durability and strong bonding with the other layers of the board.
Wood Core
The board features a full wood core precisely shaped using CNC technology.
CNC machining is used to cut the outline, drill the holes and create the required 3D profiles in the core.
Invisible Inserts
The Invisible Inserts system keeps the bottom surface clean and uninterrupted.
The inserts are visible only from the deck side, where pads and straps are mounted. This avoids disrupting the flex pattern and gives the shapers more freedom when designing the bottom shape.
Carbon fins
Slicer 2027 uses lightweight, injection-moulded carbon fins.
Features
Fusion Side Walls
Fusion Side Walls are the strongest CrazyFly ever made. They are a special mix of the latest high end polymers creating unbelievable strength and bonding.
Lost and found
The lost and found feature adds to your safety and protects your gear. Make sure to register your products to take full advantage of this feature. Anyone can scan the code and contact the owner if the product is lost and found. All under protected privacy.
Wood Core
Inverted outline saves weight in the center of the board and creates more surface area on the tips where the board is mostly in contact with water when edging. You get the best of both worlds, optimized weight and large tips surface area for the ultimate light wind performance.
Step Cap
The Step Cap technology allows for thinner rails, which enhance the upwind and tracking abilities of the board.
Full Carbon Construction
Based on sixteen years of experience in building high quality kiteboards with top performance, CrazyFly designers simply believe that carbon fibers are irreplaceable. Carbon fibers are ultra light and at the same time extremely strong. This material is very dynamic and it returns instantly to its original shape after being stressed, which provides loads of pop in carbon fiber boards.
Asymmetric Fins Position
The fins are positioned on the heel edge of the tips and in the center of the tips. Due to the asymmetric fin position, the fins stay in the water all the time and provide better upwind ability of the specialised light wind board: Slicer and Cruiser LW.
Invisible Inserts
Invisible inserts are an innovative feature that creates a beautiful united surface of the bottom of the board. Not only does this make the board look much better, but it also does not disrupt the flex pattern of the board and allows shapers to be more creative without limits. Inserts are only visible from the top for mounting pads and straps.
Set includes
- Slicer 2026 board
- Fins carbon 50 cm
- Handle + screws
For instant answer - open the chat and ask your question. We're active 9.00-17.00 CET.
Is it afterhours? No problem - leave us a message and we’ll respond early the next day.
+48 61 641 70 22
For those who prefer phone calls - that's our number. You can give us a ring between 9.00-17.00 CET.
Facebook
Instagram
YouTube
