YOUNG GUN AIR

Simply a great windsurf and paddle board for kids, the Young Gun Air features awesome handling advantages:
It can be rolled up and fits into the backpack it comes with – no more need for a roof rack for transport and no big garage for storage.
For paddling you could even take it in the backpack to the beach with your bike.
It is also considerably lighter than any hardboard of this size.

The high tech Drop Stitch Technology makes it so stiff that you will easily get it gliding but the surface itself is so soft that you won’t hurt yourself when falling on it.

The Welded Seam Technology increases the durability. The heat welded connection creates a very strong mechanical joint that literally fuses two parts into one and thus is superior to the standard chemical gluing. This welding process of amalgamating two different layers into one makes the board safer, lighter and stiffer.

INCLUDED ACCESSORIES

• Fin
• Pump
• Repair set
• User manual
• Backpack

Instead of a daggerboard the additional centre fin provides directional stability to reduce side drift and helps to go upwind.
Being longer than the normal Young Gun also helps to go upwind due to its longer waterline length. 

This board offers so much fun and is a great kids’ toy

LIGHT EDITION 3DS

The pre-laminated double layer Light Edition construction is the ultimate in light weight. The machine-pre-laminated 2 layers of air tight PVC creates a durable shell of accurate thickness. This shell is then machine laminated directly onto the 500D Polyester Drop Stitch fabric. JP offers the LE 3DS boards both in 5” (for lighter riders) and 6” thickness.

1. Rail - Outside rail layer glued over the first layer for added stiffness and abrasion resistance.
2. Double Layer Drop Stitch - The first PVC layer makes sure your JP inflatable is 100% airtight, and the top PVC layer creates a laminated structure for the ultimate in lightweight performance.
3. Inner Rail - First rail layer that is welded to the DS fabric to ensure long-lasting mechanical bond.
4. 3D Stringer - The 3D stringer is the most innovative solution to increase the stiffness of an inflatable board. It connects the deck, rail and bottom into one strong and solid U-beam. This has increased the stiffness of the boards up to 30%. Furthermore, the 3D Stringer increased the glued overlap surface in the high high-stress standing area, increasing the safety of the boards.
5. Welded Seam Technology
6. Pre-Lamination - Triple Layer Composite and Double Layer constructions both include the specially developed process of pre-lamination. This high tech process consists of machine-lamination of the multiple layers into a shell that has accurate thickness as well as superior abrasion and stretch properties. Compared to normal double layer boards designers have been able to remove the manual glue application from the process and with it the room for error, the excess weight of the glue and the additional health hazards for JP workers. The fiber-reinforced layers create super strong and durable boards with a minimal amount of stretch.